There are many classifications of printing and dyeing auxiliaries. Dyeing agents include dyes, dispersants, scouring agents, softeners, hair effect enhancers, polyester low-temperature dyeing carriers, substitute alkalis, CT powders, integrated dispersants, phosphorus-free environmentally friendly integrated agents, and acid Levelling agent, levelling agent for cotton, acrylic fiber levelling agent, smoothing agent, mercerizing penetrant (mercerized oil), chemical fiber oil (polyester oil, POY oil), high-efficiency deboiling powder, hydrogen peroxide stabilizer, silicon removal Agent, foaming agent, soaping agent (low-foaming soaping agent, acid soaping agent, anti-staining soaping agent for white ground), condensing agent, liquid wax (yarn smoothing agent), finishing agent, antistatic agent, wool Mercerizing agent, raising agent, fixing agent (formaldehyde-free fixing agent, turquoise fixing agent, color-changing fixing agent, acid fixing agent), stiffening agent, oxygen bleaching stabilizer, degreasing agent, printing auxiliary.
This article mainly introduces the following three types:
Cooking aids
Fabric desizing, scouring, bleaching and mercerizing are all important processes before fabric printing and dyeing, which are collectively called scouring.
Scouring is to boil the desizing cotton fabric in a 10g/L dilute caustic soda solution for several hours to remove the cotton seed hulls, waxes, pectins, nitrogen-containing substances, pigments and other impurities on the cotton fibers, as well as impurities remaining in the cotton fiber. The slurry on the cloth can obtain a good appearance and water absorption performance, and effectively improve the printing and dyeing and finishing effects.
The synthetic fiber does not need to be scoured, but the blended fabric with cotton fiber still needs to be scoured, but soda ash should be used instead of caustic soda, or a lower concentration of caustic soda solution should be used.
Some surface active agents should be added to the scouring liquid to improve the permeability of the lye, promote the emulsification of the wax, and further emulsify and disperse the impurities from the fiber in the scouring liquid.
Pigment printing is to use the film-forming effect of the binder to firmly adhere the insoluble dye to the fabric to achieve the purpose of coloring.
Adhesive is the main component of pigment printing paste. It is a kind of polymer film-forming substance, which adheres the paint to the fabric through film formation. Therefore, the adhesive is required to have strong adhesion to the fabric and reproducibility, aging resistance, Solvent resistance, acid and alkali resistance, chemical resistance, clear and transparent film formation, no color after printing, no damage to fibers, certain flexibility, good hand feeling, and easy to remove from the printing machine.
Thickener is another important component of pigment printing paste. It has the functions of thickening color dyeing, promoting adhesion and emulsification, etc., so that the printed fabric can obtain uniform and clear outline patterns. Not only can the color yield and vividness be improved, but kerosene is not used or used less in the printing paste to reduce air pollution.
There are two types of synthetic thickeners: anionic and non-ionic. The former has strong adaptability and can be used for dye-proof and discharge printing, but the thickening effect is poor; the latter has high viscosity and thickening effect, which is good for printed fabrics. There is no adverse effect on the brightness of the shade, the washing fastness and the softness of the hand.
The main function of the crosslinking agent is to improve the fixing ability of the adhesive. The printing has better fastness, and it can also reduce the curing temperature, combined with the actual short curing time, but the amount should be appropriate, otherwise it will cause the fabric to feel Bad.
The emulsifier is added in order to obtain a good emulsifying thickener. Generally, an alkylphenol polyoxyethylene ether with a blocked end group is used, and the end group is blocked with an isocyanate.
Pigment printing auxiliaries also include softeners, diffusing agents and defoamers.
Dyeing auxiliaries
Dyeing agents are the main body of the dyeing process. Different fiber fabrics use different dyeing agents and are carried out according to different processes. Dye processing auxiliaries include cosolvents, dispersants, color developers and phthalocyanine auxiliaries.
The dyes used in dyeing are direct dyes, vat dyes, reactive dyes, phthalocyanine dyes and insoluble azo dyes.
Leveling agents include natural fiber leveling agents, synthetic fiber leveling agents, and blended fabric leveling agents. The condition for leveling agents is that the dye can be slowly absorbed by the fiber or the dark part of the dye can diffuse to the light part. Does not reduce the color fastness. All auxiliaries with slow-dyeing and migration-dyeing effects are called leveling agents.
There are three types of fixing agents, cationic surfactants, non-surface-active quaternary ammonium salts and resin-based fixing agents. Fixing agents can cause dyes to form water-insoluble dye salts or increase the size of dye molecules. It is soluble in water to improve the firmness of dyeing.
Fluorescent brightener is abbreviated as FWA. With the help of optical complementary color, the yellow-brown pigment on the fabric that cannot be removed by chemical bleaching becomes whiter, and the whiteness is more beautiful due to the increased brightness.
Most softeners have fragrances. Fragrances and dyes are mostly petroleum derivatives and contain benzene. If the printing and dyeing auxiliaries manufacturers use poor-grade raw materials, they will also cause skin irritation. During the washing process of clothes, the fine fibers are often entangled, tangled together, or even broken. After the clothes are washed for many times, the alkaline effect of the detergent will affect the inherent smoothness, extensibility and elasticity of the fibers. The thing is that the whole piece of clothing looks old and invisible, and feels harder to the touch. The more the clothes are washed, the more obvious the feeling.
The function of the fabric softener is as if a protective film is evenly applied to the surface of the fabric fiber. Due to the absorption of the softener on the fiber surface, the friction coefficient between the fibers is reduced.
